Use cementitious patching and leveling compounds that meet or exceed maximum moisture level and pH requirements. Claims will not be accepted for flooring that has been cut to size and/or installed.
If you have any concerns about the product ft or fnish, call Shaw Information Services at 1-80. Inspect all planks for damage before installing.
#Floorte pro install
To minimize shade variation, mix and install planks from several cartons. If cabinets are to be installed on top of the flooring (including islands), that area of material must be fully adhered to the subfloor (including an additional 2’ft beyond the cabinets and islands). Install product after all other trades have completed work that could damage the flooring. Excess temperature due to direct sunlight can result in thermal expansion and UV fading. During peak sunlight hours, the use of drapes or blinds is recommended. This allowance is for floating floors only and does not apply to glue-down installations.Īvoid exposure to direct sunlight for prolonged periods, doing so may result in discoloration. General InformationĪll instructions and recommendations should be followed for a satisfactory installation.Īcclimation of material prior to installation is not required, however, the floor covering should be installed in a climate controlled environment with an ambient temperature range between 55° - 85☏ (13°-29☌) or average temperature of 70☏ (21.1☌).įor installations involving 3 season scenarios, meaning, the dwelling or installed space is without climate control for extended periods during certain seasons of the year, the post installation temperature range allowed is an ambient room temperature between -25☏ and 155☏ (31.6°- 68.3☌). Resilient Installation Guidelines for SPC Products I.
0 kommentar(er)
